Pantone™ PMS 7478 C

When ordering PMS 7478 C paint, always specify the full Pantone code including the suffix. The letter at the end, such as 'C' in PMS 7478 C, indicates the color series and finish intended by the Pantone standard. Avoid referencing the color by name only, as several Pantone colors may have similar names or numbers without being identical. For accurate brand results, double check your standards or brand guidelines and provide the full code to the vendor when ordering. This minimizes the risk of receiving the wrong color target.

When applying PMS 7478 C paint to plastics or low-surface-energy materials, keep in mind that not all plastics will accept paint without special preparation. Some plastics may require specific adhesion primers to ensure the paint bonds correctly and maintains the intended appearance. It is important to test PMS 7478 C paint on the actual substrate before moving to full production to confirm adhesion, color consistency, and finish. Always follow surface preparation guidelines specific to the type of plastic for best brand results.

Ordering Pantone PMS 7478 C in paint means you are specifying a visual color target as defined by the Pantone Matching System. This standard allows vendors to reproduce a color aiming for appearance alignment with the Pantone reference. It does not specify a particular paint formula, manufacturing process, or finish type. The paint will be matched to the target visual standard under typical viewing conditions, but differences may occur depending on substrate, finish, and lighting. PMS 7478 C is intended for projects where consistent, brand-focused color is required rather than material-specific touch-up or repair.

To achieve a consistent appearance when applying PMS 7478 C paint over large areas, use proper surface preparation and apply all coats under similar conditions. Maintain a consistent spray distance or application technique, overlap passes appropriately, and avoid stopping mid-surface. Highly saturated or lighter colors like PMS 7478 C may need extra coats to reach full coverage, so plan for enough product and drying time. Always evaluate color uniformity under the lighting where the final project will be displayed to ensure the intended brand presence.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7478 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7478 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.