Pantone™ PMS 2622 C

For accurate comparison of PMS 2622 C samples, always view all samples under the same lighting conditions, ideally matching the final installation environment. Use identical substrates when possible, as color can shift across materials. Allow coatings to fully dry and cure before making any judgments, since color and finish can change during this time. This approach helps ensure approval decisions for PMS 2622 C support brand consistency and minimize unwanted variation between components.

PMS 2622 C is a dark, muted purple with low light reflectance, which means it may require more than one coat for uniform opacity, especially over lighter surfaces. Using an undercoat in a similar tone or a gray base can help improve coverage and reduce the number of finish coats needed. Planning for additional coats is recommended to achieve the intended brand appearance and prevent uneven color in high-visibility applications.

The finish you select for PMS 2622 C can significantly affect how the color is perceived. A gloss or satin finish will enhance depth and bring out more vibrancy, while a matte finish will present PMS 2622 C as more muted and understated. When matching brand standards, consider the specified finish, since differences in sheen can shift perceived brightness or saturation and affect viewers' impression of the color.

Primer is recommended for PMS 2622 C if you are coating bare substrates, uneven surfaces, or switching between different materials. The need for primer also depends on the paint type and expected wear. Proper priming enhances adhesion and helps achieve consistent color results, especially for brand displays or installations. Check the specific guidance for your substrate and product type to ensure the best outcome for PMS 2622 C.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2622 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2622 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.