Pantone™ PMS 169 C

To achieve consistent results when reordering Pantone PMS 169 C paint, always use the same paint product type and sheen as your approved sample or previous order. Matching the product format, such as spray paint or a specific finish, is critical since the color can appear different depending on sheen. Always reference the same approval standard or target sample during each order to help maintain brand accuracy across production runs. Using a consistent substrate and application process further reduces the chance of visible differences.

It is recommended to order a sample of PMS 169 C before full production when you have high-visibility brand projects, large installations, or strict brand approval workflows. Sampling is also important if the finished product will be exposed to unique lighting conditions or applied to substrates such as metal, plastic, or wood, which may affect the appearance. Testing a sample lets you confirm color accuracy and appearance in the actual environment, minimizing the risk of costly errors or rework.

PMS 169 C, like all Pantone colors, may shift in appearance depending on the lighting environment. This is because different light sources, such as fluorescent, LED, or daylight, can emphasize the color's undertones and alter its warmth or brightness. To ensure PMS 169 C matches your visual brand intent, always evaluate samples in the same lighting where your finished installation will be viewed. This is especially important for brand settings where accurate color display is critical.

When using PMS 169 C on plastics or other low-energy surfaces, adhesion can be a challenge. Plastics often require specific primers or surface treatment to allow proper paint bonding. Before full production, always test PMS 169 C on the actual plastic being used to verify coverage and appearance. This approach helps you avoid surprises during the primary rollout and ensures the color meets both visual and performance expectations for your branding application.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 169 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 169 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.