Pantone™ PMS 7703 C

Pantone PMS 7703 C is a deep, saturated blue-green that can be challenging to match across different materials and finishes. Bright and vivid colors like PMS 7703 C often require highly precise mixing, and results can vary with substrate, finish, and lighting. MyPerfectColor specializes in producing visually accurate matches for Pantone colors, but it is important to understand that appearance may shift depending on gloss level or viewing conditions. Always review physical samples where possible to confirm the match meets your brand standards before moving to production.

For brand or client signoff on Pantone PMS 7703 C, it is recommended to order a small sample of the coating on your actual substrate. Evaluate the color under the lighting conditions where the finished product will be installed. This helps confirm that PMS 7703 C appears correct for your project before you proceed with a full order. Sampling is especially important for saturated or deep colors to avoid costly rework or mismatched results.

Pantone PMS 7703 C is often specified in signage and display fabrication because it provides a standardized target for consistent brand color reproduction. Fabricators use PMS 7703 C to ensure that logos, backgrounds, and branded elements look the same across all components. Since substrate and finish affect appearance, it is good practice to sample PMS 7703 C on your real material to confirm the result before mass production.

The Safety Data Sheet (SDS) is determined by the type of paint or product used to make Pantone PMS 7703 C, not by the color itself. To locate the correct SDS, select the specific product type on the MyPerfectColor site and access the SDS library for that formulation. If you need assistance, contact customer support with your product details and they can direct you to the appropriate SDS.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7703 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7703 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.