Pantone™ PMS 2421 C

When comparing Pantone PMS 2421 C for approval, always evaluate samples under consistent lighting that matches your installation or display environment. Use the same substrate and finish whenever possible, since these factors can significantly affect the appearance of PMS 2421 C. Ensure coatings are fully dry and cured before making a final decision, as color appearance often shifts during drying. Comparing uncured or wet samples can lead to incorrect judgments about brand alignment or acceptance.

For Pantone PMS 2421 C, apply multiple light coats instead of one thick coat. Allow each layer to dry for an appropriate interval before applying the next coat, as recommended by your paint format and environmental conditions. This helps achieve a smooth, even appearance and reduces the risk of runs or uneven color, which is especially important for visually critical brand-facing surfaces.

When using PMS 2421 C for pop-ups or retail installations, confirm durability requirements and test color samples on the intended substrate before commitment. Evaluate painted samples under actual installation lighting, as PMS 2421 C''s appearance can shift with both lighting and sheen. Sampling first helps ensure brand consistency and reduces surprises in high-visibility retail or event projects.

PMS 2421 C is a vivid and saturated green that may show lower hide than less intense colors. For best results, consider applying a suitable undercoat, such as a white or primed base, to support uniform coverage and color accuracy. Plan for multiple coats to achieve full opacity, especially on non-white surfaces or where high brand consistency is needed.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2421 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2421 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.