Pantone™ PMS 2300 C

The finish you select for PMS 2300 C can significantly change how the color is perceived. A matte version of PMS 2300 C will usually look less vivid and slightly lighter, while higher-gloss finishes tend to make the color appear deeper and more saturated. Comparing matte and gloss versions side by side can look like a completely different color, even though both target PMS 2300 C. Always compare samples in the same sheen under your intended lighting to confirm you are satisfied with the result.

Ordering a standard PMS 2300 C match is best when you need accurate, consistent visual brand color for display, signage, exhibition components, prototypes, or marketing installations. Use the Pantone PMS reference when your project requires the color identified as PMS 2300 C, and you are aiming for brand fidelity rather than matching an existing physical part or previous finish. This approach is suitable for new builds, brand experiences, and visually aligned components.

For pop-up or retail applications, carefully evaluate PMS 2300 C samples in your actual lighting to verify appearance. Highly saturated greens like PMS 2300 C may require extra coats for full coverage, especially over contrasting bases. Choose a finish that suits your durability needs and matches the intended visual effect. Test a sample on your specific substrate before committing to large production runs to ensure both color fidelity and surface compatibility.

The PMS 2300 C standard is used for brand reproduction and consistent new applications, not for touch-up or repair work. If you need touch-up-grade precision to match an existing part, it is best to send a physical sample of the coated item for a custom match rather than relying on a generic PMS 2300 C formula. This helps ensure the best possible visual alignment with your specific substrate and coating.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2300 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2300 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.