Pantone™ PMS 7445 C

To ensure you receive the correct color, always reference both the Pantone PMS code and the suffix when ordering, such as 'PMS 7445 C.' The code uniquely identifies the exact color target, while the suffix (like 'C' for coated) points to a specific variation. Relying only on the name without the full code or skipping the suffix can lead to confusion or an incorrect product, as Pantone color names may sound similar or change across systems. Double-check all branding and specification documents for the exact code and suffix before placing your order.

PMS 7445 C has a moderate saturation with a medium-dark appearance, which may require multiple coats to achieve even coverage, especially over contrasting or patchy surfaces. For best results, start with a uniform, neutral gray undercoat to support color consistency and reduce the number of finish coats needed. Planning for at least two finish coats is recommended to help achieve a uniform brand result without visible streaks or surface show-through.

Ordering PMS 7445 C as a Pantone PMS match means you are requesting a paint color that visually targets the standardized appearance of Pantone PMS 7445 C. This is based on a visual color reference, not a specific paint formula, manufacturing process, or finish type defined by Pantone. The goal is accurate visual alignment for branding or display applications, but some variation can occur across materials, finishes, and lighting. If you have strict requirements, test a sample under project-specific conditions before full use.

For large areas using PMS 7445 C, use a consistent application method throughout the project and maintain even surface preparation. Mix all paint together before starting if using multiple cans to avoid batch variation. Apply all coats in the same direction and lighting conditions when possible. Planning for an extra coat can help prevent patchiness, especially over textured or uneven substrates. Review results between coats to catch inconsistencies early and ensure visual consistency for brand-critical work.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7445 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7445 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.