Pantone™ PMS Process Blue C

The durability of PMS Process Blue C spray paint depends on several factors including the quality of surface preparation, use of a compatible primer, topcoat selection, and exposure to environmental conditions. For most indoor brand displays or short-term marketing use, the default formulation typically provides strong visual impact. Outdoor use or high-traffic environments may require a protective clear coat for added durability. Always match your paint type and clear coat to your expected use conditions to ensure optimal brand presentation and performance.

PMS Process Blue C paint is made to order for each customer to achieve accurate color targeting. Standard production times usually range from a few days to about a week, depending on the selected product type and current production volume. Plan for extra lead time if you are ordering large quantities or need specialty formats. It is best to order early if you have a fixed installation or event schedule.

When evaluating PMS Process Blue C samples, use consistent lighting that matches your actual installation environment. Apply the paint to the same type of substrate and finish you will use in your finished project. Allow coatings to fully dry and cure before making color judgments, as wet paint or uncured finishes can appear different. Comparing your sample directly to an official Pantone reference under these controlled conditions helps ensure you achieve the intended brand result.

Not all plastics accept paint in the same way, and low energy surfaces can present adhesion challenges for PMS Process Blue C paint. Many projects benefit from a specialized primer or surface preparation step to achieve good coating performance. It is strongly recommended to test the paint system on your exact plastic or material before full production, especially for branding and display work where appearance is critical. Consult with the paint supplier if you are unsure which primer to use or need help evaluating adhesion.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS Process Blue C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS Process Blue C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.