Pantone™ PMS 629 C

Pantone PMS 629 C is part of a standardized color system, but most major paint brands use their own unique color palettes and formulas. There is no direct conversion between Pantone PMS 629 C and other brands. Attempting to cross-reference increases the risk of color mismatch, especially for branding applications where precision is critical. For best results, specify and order paint labeled as matching Pantone PMS 629 C and request a sample on your actual substrate for review.

For metal or powder-coated surfaces, preparation is essential for an accurate appearance of Pantone PMS 629 C. Clean and scuff the surface to promote adhesion, and note that existing gloss or coatings may influence the final look. Differences in finish can affect perceived brightness and color. Always test Pantone PMS 629 C on your actual part before proceeding to full production to confirm the look meets your project needs under real-world lighting.

Pantone PMS 629 C is suitable for prototypes and concept models that require visual alignment with brand standards. Choose the paint format that matches your workflow, such as spray paint or paint pens. Before committing to production, create a sample on the same material as your model and review it under your intended display lighting. This helps confirm that the color matches expectations and supports brand consistency from early-stage concepts through to final fabrication.

To achieve a smooth and consistent finish with Pantone PMS 629 C spray paint, apply several thin coats rather than a single heavy layer. Allow enough flash or drying time between coats so the paint does not run or sag. This approach helps achieve even coverage and the most accurate color appearance for branding and display projects. Reviewing the result under your planned lighting is recommended before project sign-off.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 629 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 629 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.