Pantone™ PMS 628 C

Surface texture can have a significant impact on how PMS 628 C appears. A smooth, glossy surface will reflect more light and make this light blue color appear brighter and slightly more saturated. In contrast, matte or textured finishes scatter light and can make PMS 628 C look softer or more muted, sometimes appearing slightly darker. For projects where precise brand consistency is required, it is important to consider how texture and gloss will influence the final look and to approve samples under the actual lighting conditions and finish you plan to use.

When using PMS 628 C on plastic or other low-surface-energy materials, adhesion can vary widely depending on the type of plastic. Many plastics require specific adhesion primers to ensure the paint adheres properly and delivers consistent color. Before full production or installation, always test the PMS 628 C paint system on your actual substrate to verify appearance and durability. For critical brand projects, confirming performance with samples is strongly recommended.

Matching PMS 628 C precisely can be challenging, especially across different substrates and gloss levels. Although PMS 628 C is a moderate, cool blue, factors such as surface type, primer, and application process all influence the final appearance. MyPerfectColor specializes in producing visually accurate matches for branding and display, but slight variations can occur due to these factors. For projects requiring high visual accuracy, evaluating painted samples on your material and under actual lighting is the best way to confirm the match before full production.

To achieve a consistent result with PMS 628 C on metal or powder-coated surfaces, proper preparation is key. All surfaces should be clean, free from oil or dust, and lightly scuffed if possible to improve adhesion. The color and gloss of any existing coating may influence the final look of PMS 628 C. For important brand installations, apply and check a sample on the actual metal or coated part so that you can evaluate appearance and coverage before proceeding with the full project.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 628 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 628 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.