Pantone™ PMS 5635 C

The finish you choose for Pantone PMS 5635 C can significantly influence the color's final look. A gloss finish will enhance the depth and apparent saturation of PMS 5635 C, making the muted green-blue appear slightly richer and brighter. In contrast, a matte or flat finish will subdue reflections and can make the color look more muted or even dull, especially on textured surfaces. Satin or semi-gloss options strike a balance, adding subtle sheen without overpowering the color. To achieve a brand-consistent look, always confirm finish specifications and evaluate samples under the actual lighting conditions where the color will appear.

The Safety Data Sheet for a paint product made in Pantone PMS 5635 C is determined by the specific type of paint or coating you select, not by the color code itself. After choosing your required paint format (for example, spray paint, epoxy, or house paint), refer to the SDS library on the product page or request the SDS from the manufacturer. Make sure to review the SDS for your chosen product format before use, especially for workplace or commercial projects.

When reordering Pantone PMS 5635 C, you can expect visually close alignment if you use the same product type, finish, and approval process as your previous order. However, slight differences can occur between batches, especially if you change the paint format, gloss level, or application method. For consistent results in brand or marketing environments, use the same material specifications, document your reference target, and if possible, approve samples before full runs. Always avoid switching between different paint types or sheens mid-project to minimize visible variation.

Sampling Pantone PMS 5635 C is recommended for high-visibility projects, large installations, or whenever the appearance must be approved by brand stakeholders. It is also important to sample if the color will be applied to different substrates or will be viewed under critical lighting conditions. This allows you to confirm the real-world appearance of PMS 5635 C in your specific environment and make adjustments if needed before committing to a full production run.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 5635 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 5635 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.