Pantone™ PMS 462 C

When evaluating PMS 462 C samples for brand or display approval, always compare samples under consistent lighting conditions and on the same substrate you plan to use. Ensure that all coatings are fully dry or cured before making a final decision, since color appearance can shift during drying. Using a physical Pantone reference for PMS 462 C is essential for visual accuracy, and observing multiple samples side by side will help confirm brand consistency.

When ordering paint for PMS 462 C, always specify the exact Pantone code including the suffix 'C' to match the intended standard. The PMS code is a precise identifier used in branding and production, not just a name. Avoid using only the color name because similar names may exist in other Pantone ranges. Double-check project specifications to ensure you have the correct code and suffix before placing your order.

PMS 462 C is a very dark, muted brown, but like many Pantone colors, coverage can vary by substrate and application method. For best results and uniform color, plan to use a compatible undercoat when painting over light or uneven surfaces and be prepared to apply multiple coats if full coverage is needed. Choosing the right undercoat supports color uniformity and helps achieve the professional, brand-consistent appearance required for PMS 462 C applications.

For PMS 462 C, apply several light coats of spray paint rather than one heavy coat. Allow each layer to dry or flash off before adding the next to prevent uneven coverage or runs, which are more noticeable with dark colors. This method helps achieve a smoother, more uniform brand appearance and reduces visible inconsistencies, especially for display and branded environments.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 462 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 462 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.