Pantone™ PMS 113 C

For the most consistent results with PMS 113 C, always specify the same product type and sheen when reordering. Variations in format or finish can cause noticeable differences in how this light, vivid yellow appears, especially in environments where brand accuracy is critical. Use the same Pantone reference (PMS 113 C) for every order and evaluate samples in the intended lighting and substrate conditions. For critical projects, keep a retained sample or use a pre-approved control standard for future approvals to reduce the risk of unexpected differences between production runs.

A typical 11 ounce spray can of PMS 113 C covers about 20 square feet per coat under ideal conditions on a smooth, primed surface. However, vivid yellows like PMS 113 C often require extra coats for full opacity, especially over dark or uneven substrates. To estimate your needs, calculate the total area to paint and assume 2 to 3 coats for best uniformity. Factor in surface texture and any absorbency, which can increase paint usage. For precise requirements, ordering an extra can as a reserve is a practical approach for brand applications.

PMS 113 C is a Pantone standard color, and using licensed, authorized reproduction ensures your brand color is matched to the correct Pantone reference. MyPerfectColor is authorized to produce PMS 113 C in paint, providing an accurate color target for visual brand consistency. Unauthorized or generic matches may not conform precisely to Pantone standards, increasing the risk of color deviations in professional or brand-sensitive environments.

Proper surface prep helps PMS 113 C achieve its intended vibrancy and consistency. Start by cleaning surfaces to remove dust, grease, or oils. Lightly scuff glossy or smooth surfaces to improve adhesion. Make sure the substrate is dry and free from residues. Test spot in an inconspicuous area to verify adhesion and color appearance, especially on non-standard materials. For dark or uneven surfaces, a white or light-colored primer may improve coverage and reduce the number of coats needed for uniform color.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 113 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 113 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.