Pantone™ PMS 7488 U

For pop-ups and retail environments using PMS 7488 U, start by applying a small sample on the actual substrate you plan to use. View it under the installed lighting, including daytime and evening conditions if applicable. Pantone PMS colors are visual standards, and lighting can noticeably change how saturation and brightness are perceived.

Confirm durability needs based on how the surface will be handled or cleaned, then approve the color appearance before committing to larger quantities. This step helps avoid surprises once PMS 7488 U is applied across a full installation.

Before applying PMS 7488 U, make sure the surface is clean, dry, and free of dust, oils, or residue. Degrease where needed, especially on plastics or metals, and lightly scuff glossy surfaces to improve adhesion if appropriate for the material.

Always test a small area first to confirm adhesion and appearance. Proper surface preparation helps PMS 7488 U achieve more uniform coverage and reduces the risk of visual inconsistency.

PMS 7488 U is matched to the Pantone PMS reference, not to a previous physical batch. While the color target remains the same, minor variation can occur between production runs, especially across different product types or sheens.

For the most consistent results, reorder the same paint type and sheen, and approve new batches against the same Pantone reference under consistent lighting. Keeping a retained sample from earlier projects can also help with visual comparisons.

A standard Pantone match for PMS 7488 U is appropriate when the Pantone PMS reference is the intended color target, such as for brand-facing displays, signage, exhibits, and prototypes. In these cases, visual alignment to the Pantone standard is the primary goal.

For large or high-visibility installations, it is still recommended to sample and approve PMS 7488 U on the actual materials and under real lighting conditions before final production.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7488 U. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7488 U in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.