Pantone™ PMS 7673 C

The PMS 7673 C color in a Pantone book is a reference standard printed on coated paper and serves as the official color target. When reproduced in paint, the actual appearance of PMS 7673 C can differ based on factors like sheen, substrate, and lighting conditions. For the most accurate results, always compare samples applied to your real material and under the intended lighting. Do not expect an exact match between a printed book and a painted surface, especially across different finishes or materials.

Choose a standard Pantone PMS 7673 C match when your application is focused on branded displays, signage, exhibit components, prototypes, or marketing installations where visual alignment with the Pantone reference matters most. This is typically the right approach for projects driven by marketing or brand guidelines, where achieving a consistent and recognizable color across surfaces is more important than matching an existing coating or material.

The finish or sheen you choose has a noticeable impact on how PMS 7673 C appears. Higher gloss finishes will make the color appear marginally brighter and more intense, while matte finishes deepen the color and give it a more muted, professional look. Slight shifts in perceived vibrancy and richness are normal as sheen changes, so always test your preferred finish on the actual substrate if critical color appearance is needed for your brand or display application.

Whether you need a primer for PMS 7673 C depends on the paint type, the substrate you are coating, and the project requirements. Primer is generally recommended for uncoated, absorbent, or challenging surfaces to ensure proper adhesion, coverage, and color uniformity. Using a primer is especially important if covering dark colors, porous materials, or if a high degree of brand color consistency is required.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7673 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7673 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.