Pantone™ PMS 7583 C

PMS 7583 C is not recommended for use as a touch-up specification on existing finishes or products. Pantone PMS codes define a visual color target but do not specify sheen, substrate, or application conditions. Existing coatings can age, fade, or have finish variations that a standard Pantone match does not account for. For brand-facing work, PMS 7583 C is intended for new projects where visual brand alignment is the main goal, not as a proxy for precise repair or spot application on established finishes.

For best results with PMS 7583 C spray paint, apply multiple thin coats rather than one heavy coat. Allow reasonable drying and flash time between coats to help the paint level and prevent runs or uneven build. Highly saturated oranges like PMS 7583 C may require extra coats for uniform hide, especially over light or uneven substrates. Following this approach helps maintain color accuracy and finish consistency on your brand display elements.

PMS 7583 C is specified as a color target for branding, signage, and exhibit fabrication when consistent, recognizable color is required across visual elements. Pantone codes offer a shared reference point for producers and clients. However, because surfaces, materials, and finishes can affect the final appearance, it is recommended to sample PMS 7583 C on the actual substrate before full production. Visual consistency with brand standards is usually the priority when using PMS 7583 C in these settings.

Yes, plastics and other low-surface-energy materials can be challenging for paint adhesion, even when matched to PMS 7583 C. Not all plastics will accept paint without special preparation. A primer designed for plastics or additional surface preparation may be necessary for long-term adhesion. Always test the PMS 7583 C paint system on your actual plastic substrate before starting full production. This helps confirm both appearance and durability to meet your project requirements.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7583 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7583 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.