Pantone™ PMS 2063 C

Pantone PMS 2063 C is selected by brands and design teams when a deep, saturated magenta-red is specified for high-visibility visual branding. This color is often used for display fabrication, exhibit components, signage, and prototypes where bold impact and brand consistency are priorities. When PMS 2063 C is specified in a branding guide or marketing brief, using MyPerfectColor allows organizations to translate Pantone's standard into paint for physical brand experiences and activations.

PMS 2063 C paint is custom made to match the Pantone color standard at the time you order. Because each order is produced specifically for your project, changes or returns are generally not possible once production has started. Be sure to confirm your required format, sheen, and that PMS 2063 C is the correct color for your application. Sampling is recommended for critical or high-visibility uses, as adjustments cannot be made after the order is filled.

PMS 2063 C is highly saturated and dark, so paint finish will strongly influence how it appears under lighting. A matte or flat finish will tend to mute its vibrancy and make the color look less intense. Gloss or high-sheen finishes will amplify the saturation and deepen the appearance, resulting in a more striking magenta-red. Consider finish as part of your brand presentation to achieve your intended visual impact for PMS 2063 C.

PMS 2063 C paint can be applied to many plastics, but adhesion is strongly affected by the specific type of plastic and its surface energy. Some plastics may require specialized primers or adhesion promoters to achieve a durable finish. It is important to test PMS 2063 C on your actual plastic substrate before full production to confirm adhesion and color appearance. Consult with MyPerfectColor or your coatings expert for guidance on preparation steps for plastics.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2063 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2063 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.