Pantone™ PMS 7429 C

The finish you select for Pantone PMS 7429 C can noticeably change its perceived color. A matte finish will emphasize the muted, soft qualities of PMS 7429 C, often making it look more subdued. A gloss or satin finish can brighten the color and make underlying rose or mauve tones more apparent, giving it a slightly richer look. For brand consistency, always confirm finish requirements before ordering and, when possible, assess samples in the intended finish and environment to ensure the desired visual impact.

To maintain a consistent look with PMS 7429 C across large areas, use the same batch and product type for all coats. Apply the paint in controlled, even passes and keep a wet edge to avoid lap marks. Plan the job so each section blends seamlessly into the next. For saturated or light colors like PMS 7429 C, additional coats may be needed for solid coverage. Always review the surface in the lighting where it will be seen to spot any unevenness before the paint cures.

PMS 7429 C is a Pantone Matching System reference, making it ideal for projects requiring consistent brand color across different vendors, materials, or fabrication processes. In signs, displays, and exhibits, specifying PMS 7429 C helps ensure the intended brand color is achieved, promoting visual consistency. If exact appearance is critical, it is best to confirm the color using samples applied to the actual substrate and finish to account for how PMS 7429 C might look in the specific environment.

Before painting metal or powder-coated parts with a PMS 7429 C match, ensure all surfaces are thoroughly cleaned and any gloss or previous coatings are scuffed to promote adhesion. Existing finishes can influence the color and sheen of the final result. Since the appearance of PMS 7429 C may vary based on substrate and finish, it is a good idea to test a sample first. This helps confirm that the achieved look meets brand expectations under actual lighting and viewing angles.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7429 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7429 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.