Pantone™ PMS 659 C

The finish or sheen you select for PMS 659 C can significantly change how the color is perceived in displays, prototypes, or brand environments. Gloss finishes reflect more light, which can make PMS 659 C appear brighter and slightly more saturated. Matte or flat finishes absorb more light, resulting in a softer, less intense blue. Satin finishes provide a middle ground, often giving a balanced look. For achieving brand consistency, review PMS 659 C samples under the lighting and finish conditions used in your application before finalizing product selection.

Choosing the best paint type for PMS 659 C depends on your project's material, location, and exposure conditions. For display fabrication, signage, or branded environments, provide MyPerfectColor with details about your substrate, expected wear, and desired finish. Our team can recommend the most appropriate format, such as spray paint, paint pens, or epoxy, to achieve reliable results for PMS 659 C across marketing, display, or prototyping uses.

Safety guidance and VOC exposure for paint matched to PMS 659 C depend on the specific product, such as spray paint, urethane, or epoxy. Always refer to the Safety Data Sheet (SDS) for your chosen product and follow recommended safe handling, ventilation, and protective equipment practices. If you have special project requirements, request VOC or safety documentation before ordering to ensure compliance with your needs for PMS 659 C applications.

For consistent results with PMS 659 C across large surfaces, use the same product and application method throughout your project. Plan your work to maintain a wet edge and avoid stopping midway, as this can create visible lap marks. Apply even coats and allow proper drying between layers. PMS 659 C generally covers well due to its moderate saturation, but check coverage and appearance after the first coat before proceeding with additional layers for best brand consistency.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 659 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 659 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.