Pantone™ PMS 651 C

The perception of PMS 651 C can change significantly depending on the surface texture you apply it to. A smooth, glossy texture will reflect more light and may make PMS 651 C look brighter and more saturated, while a matte or rough surface will scatter light, possibly making the color appear slightly lighter or less intense. Texture can also introduce the appearance of shadows, causing PMS 651 C to look uneven or darker in some viewing conditions. To maintain brand consistency, use the same substrate and texture for all components where PMS 651 C is specified.

PMS 651 C matched paint is custom made to order, so it is important to confirm your product type, sheen, and quantity before purchasing. Adjusting your order after production is often not possible or may require a new order. If you are uncertain how PMS 651 C will appear on your substrate or in your lighting, it is highly recommended to order a sample first. Careful selection helps avoid issues with acceptance and brand consistency in your final installation.

For projects using PMS 651 C in retail or pop-up settings, ensure the selected paint format is durable enough for the expected foot traffic and handling. Lighting can strongly influence the appearance of PMS 651 C, so evaluate samples under the actual lighting conditions where the color will be displayed. Before proceeding to a full installation, test PMS 651 C on the intended substrate to confirm visual alignment with brand standards and to identify any appearance issues in that unique environment.

The sheen you select for PMS 651 C can influence both color perception and brand presentation. Higher gloss levels will make PMS 651 C appear richer and may highlight imperfections, while lower sheens give a softer, less reflective appearance. The best choice depends on viewing distance, substrate, and desired visual impact. When consistent brand color across components is important, use the same sheen throughout your project and confirm final appearance with samples before large-scale application.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 651 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 651 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.