Pantone™ PMS 627 C

Pantone PMS 627 C is often chosen for signage, display elements, and fixtures where a very dark, cool green is critical to achieving precise brand identity. Brands and organizations seeking a technical, stable, and subdued presence may call out PMS 627 C for consistent execution across event, retail, and exhibit components. Confirm your project requirements and review physical samples, as color appearance may shift with substrate and finish.

Whether a primer is needed for Pantone PMS 627 C depends on the substrate, paint type, and conditions. For bare materials or surfaces with poor adhesion, a primer is recommended to promote coverage and color consistency, especially with such a dark green. Primers are usually necessary on metal, wood, plastics, and previously coated surfaces that show signs of wear or inconsistent finishes. Consult substrate and paint compatibility guidance for your application to ensure proper adhesion and true color results.

Altering the gloss or sheen when using PMS 627 C can noticeably affect how dark or complex the color appears. Higher gloss finishes may bring out more depth and strengthen blue-green undertones, while matte finishes can make the color appear flatter and less vibrant. For brand consistency, always evaluate and approve finish alongside the color, and compare samples under intended lighting before ordering for large projects.

When painting metal or powder-coated parts with PMS 627 C, thorough surface preparation is important for proper adhesion and appearance. Clean and scuff glossy or existing coatings to help the new layer bond. Prior finishes, surface texture, and existing gloss can cause the color to look different from chips or samples. Always test on a sample or control panel before committing to full production, as substrate and finish variations can influence color perception.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 627 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 627 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.