Pantone™ PMS 5835 C

When specifying Pantone PMS 5835 C for a pop-up or retail installation, test the color in your lighting environment before final application. Lighting can significantly change how PMS 5835 C appears, making it look more yellow under fluorescent lights and more muted under warm LED. Durability needs may differ for short-term versus long-term installations, so select the paint format that aligns with expected wear. Sampling on your actual substrates under installed lighting is the best way to confirm appearance before full rollout. This ensures your display achieves the intended brand consistency from concept through execution.

Pantone PMS 5835 C is a low-chroma yellow-green, and while not as vivid as some Pantone colors, it can still require careful planning for coverage. To achieve uniform color and avoid visible substrate variation, consider using a compatible primer or undercoat that is close in tone. Plan for at least two coats, especially over contrasting base surfaces. Sampling first is recommended, as this color may show subtle differences in hide based on substrate and application method.

Pantone PMS 5835 C can appear to shift in tone depending on lighting conditions. Fluorescent lights may enhance its yellow character, while warm LED lighting can make it seem more muted and earthy. This is normal for colors with muted or olive undertones. Evaluating PMS 5835 C under the exact lighting where it will be used is the best way to ensure the final appearance matches expectations. This step helps avoid surprises after installation.

To maintain a uniform appearance for Pantone PMS 5835 C on large-scale installations, use consistent application techniques and apply paint in a steady sequence without stopping mid-panel. Ensure each coat is fully dry before the next, and maintain wet edges to prevent lap marks or patchiness. Sampling on your surface in advance can help determine the optimal number of coats and whether a specific undercoat is needed for even results, especially for this muted green shade.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 5835 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 5835 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.