Pantone™ PMS 576 C

For the most accurate judgment of PMS 576 C during approval, compare samples under consistent lighting that reflects the intended environment. Always use the same type of substrate you will use in production. Allow all PMS 576 C coatings to dry and fully cure before making a final assessment, since color and sheen can shift during this process. Viewing angle and gloss can also affect perception, so match both factors when reviewing samples. These steps help ensure high-confidence brand alignment across displays and fabricated elements.

A typical spray can of PMS 576 C covers about 20 to 25 square feet per coat under ideal conditions. Coverage depends on application method, surface texture, color hiding power, and the number of coats needed for full opacity and color depth. Lower reflectance colors like PMS 576 C may require extra coats for even color, especially over contrasting bases. For branding and display projects, measure the total surface area, factor in at least two coats, and allow extra material for complex shapes or absorbent substrates.

To avoid mistakes, always use the exact code 'PMS 576 C' when specifying this color for your project. Color names alone can sometimes cause confusion, so referencing the full code including the 'C' suffix ensures you receive the standard target used in branding. Double-check any requirements in your documentation or brand guidelines. If you need a different finish or product format, specify this clearly at time of order to maintain brand consistency for PMS 576 C.

The optimal paint type for PMS 576 C depends on where your branded element will be located. For interior applications, select paint formulated for indoor substrates, where environmental exposure is minimal. For exterior use, choose a paint rated for outdoor durability to withstand weathering and maintain brand color integrity. Always match the paint type to the project location to achieve long-lasting, visually accurate results for PMS 576 C.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 576 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 576 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.