Pantone™ PMS 5467 C

For PMS 5467 C, which is a dark and muted Pantone color, the surface texture can change how the color is perceived. A glossy or smooth finish may make PMS 5467 C look deeper and slightly more intense, while a matte or rough texture can cause it to appear slightly lighter or less saturated due to diffuse reflection and increased shadowing. Because PMS 5467 C has a low light reflectance value, any surface flaws or inconsistent textures may become more visible, especially under strong lighting. Always evaluate samples on the intended surface to confirm visual results before finalizing production for brand or display projects.

When applying PMS 5467 C paint to plastics or low-surface-energy materials, adhesion can vary widely based on the type of plastic and its preparation. Many plastics require a specialty primer or surface treatment for lasting adhesion. It is important to test the Pantone PMS 5467 C paint and primer system on your exact material before moving to full production. This approach helps verify that both color accuracy and coating performance meet your brand and project requirements. Failure to test can lead to peeling, poor color presentation, or inconsistent brand results on signage or display components.

The shipping transit time for PMS 5467 C paint orders depends on your delivery location, the shipping method you select, and overall order processing time. If your project requires PMS 5467 C for a brand installation or display, plan ahead to accommodate potential transit and production lead times, especially if a deadline is critical. While expedited shipping options may be available, it is safest to allow flexibility in your project schedule. Review shipping options and plan for potential delays to ensure that PMS 5467 C is on site when needed.

PMS 5467 C is a dark, low-chroma color and does not have the coverage challenges sometimes seen with highly saturated or vivid Pantone colors. However, because it has a low light reflectance value, it may take more coats to fully hide lighter substrates or to achieve a uniform appearance if applied over uneven surfaces. For the most consistent brand presentation, use a suitable primer or base coat matched to the final target, and always perform a test application to check coverage before starting full-scale production.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 5467 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 5467 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.