Pantone™ PMS 315 C

Pantone PMS 315 C is a standardized color used for brand and marketing consistency, but it does not specify details like sheen, substrate conditions, or the original application method. Because of this, ordering PMS 315 C paint for touch-up on existing surfaces is likely to result in visible differences in gloss, texture, or color shade. For best results, Pantone PMS 315 C should be used to achieve brand-matched new finishes, not for spot matching or repair of previous coatings.

Whether you need a primer under PMS 315 C paint depends on your substrate and the paint type chosen. Priming is generally recommended for uncoated, porous, or challenging surfaces like bare metal, plastic, or wood, or when coverage and adhesion are a concern. If painting over a light or glossy surface, a suitable primer can improve hide and uniformity, especially for saturated colors like PMS 315 C. Always check the product guidance for your specific application to ensure the best result.

Safety and VOC expectations for PMS 315 C paint depend on the product and format you select, as options can include spray paint, paint pens, and other coatings. Always review the Safety Data Sheet (SDS) for the specific product to understand proper ventilation, protective equipment, and safe handling practices. If low-VOC or specific safety criteria are needed for your project, verify requirements before ordering.

For the most consistent and uniform finish with PMS 315 C spray paint, use several light coats rather than one heavy coat. Light coats improve coverage and reduce runs, which is especially important for deep, saturated colors. Allow each coat to dry and flash off per the product instructions before applying the next. Proper technique helps achieve smooth, brand-consistent results and takes full advantage of the vivid qualities of PMS 315 C.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 315 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 315 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.