Pantone™ PMS 2757 C

To accurately judge PMS 2757 C during approval, always compare samples under the same lighting conditions that will exist in the final environment. Use identical substrates for all samples, as different materials can cause the color to appear lighter, darker, or shift slightly in hue. Let all coatings fully dry and cure before making a decision, since PMS 2757 C may look different wet versus dry. Consistency in substrate, lighting, and film development helps ensure brand standards are correctly met.

The SDS for paint made in PMS 2757 C is tied to the type of paint or product selected, not the color code itself. Locate the SDS by first choosing your paint format, such as spray paint or urethane. Then refer to the SDS library for the chosen product to ensure you have the correct safety information before use. If you have questions, consult the supplier for the current SDS tied to your selected paint format.

Surface texture can change how PMS 2757 C is perceived. Smooth surfaces tend to make the color appear deeper and more saturated, while textured or matte surfaces may scatter light and make it look lighter or more muted. Variations in texture can also introduce unwanted shadowing or gloss variation, so always consider the finished texture when planning branding or display components for the most accurate and consistent color impression.

PMS 2757 C is a highly saturated, deep blue with a low LRV, so expect that full coverage may require more than one coat, especially over light or contrasting substrates. Planning for an appropriate undercoat, such as a tinted primer close to the final color, can improve coverage uniformity and reduce the number of coats needed. This helps achieve a consistent brand result across display surfaces.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2757 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2757 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.