Pantone™ PMS 2715 C

The perceived color of PMS 2715 C can change based on the texture of the painted surface. A glossy or smooth finish on substrates can make PMS 2715 C appear deeper and more saturated because it reflects more direct light. In contrast, a matte or textured finish scatters light, which can soften the color and make it look lighter or less vibrant. If brand consistency is critical, always evaluate a physical sample of PMS 2715 C in both the intended finish and under actual lighting conditions to confirm appearance before finalizing your order.

When aiming to match PMS 2715 C on metal or powder-coated parts, start by ensuring the surface is clean, free from oils and debris, and scuffed if needed to promote adhesion. The appearance of PMS 2715 C can shift depending on the existing coating, surface gloss, or texture. Pre-existing colors or gloss levels may also influence the final result. To achieve the closest visual match, apply a test panel of PMS 2715 C on the same substrate and finish as your final piece, and compare it to an official Pantone standard under your target lighting conditions.

Safety and VOC levels for paints matched to PMS 2715 C depend on the specific product type and formulation you order, such as spray paint, epoxy, or urethane. Before using any product, review the Safety Data Sheet for details on ventilation, handling, and personal protective equipment. Always follow safe use practices in line with the guidelines provided for your chosen paint format and application method.

If you need guidance selecting a paint type for PMS 2715 C, contact MyPerfectColor with details about your substrate, the intended environment, and any finish requirements. This information helps ensure you receive the most suitable product for visual accuracy and project needs. Available formats include custom spray paint, paint pens, brush-in-cap bottles, and more for brand and display applications.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2715 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2715 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.