Pantone™ PMS 1355 C

The appearance of PMS 1355 C can shift noticeably with different lighting and surface finishes. This color has a light, warm yellow tone that may appear softer or more vibrant depending on factors like sunlight, LED, or fluorescent lighting. Glossy finishes tend to increase vibrancy and warmth, while matte finishes can mute the color. To ensure PMS 1355 C meets your brand intent, always evaluate samples under the actual lighting conditions where the finished work will be displayed.

Sampling PMS 1355 C is recommended for large or high-visibility installations, critical brand assets, or when you need to confirm color appearance across different substrates or finishes. Because PMS 1355 C is sensitive to finish and lighting, sampling on the actual material and evaluating it under final lighting helps prevent issues with brand consistency and reduces risk before full production.

PMS 1355 C is often specified for signs, displays, and exhibits because it is a Pantone PMS color, which provides a standardized reference for brand consistency. Using PMS 1355 C ensures that all components match the intended brand color, regardless of vendor or material. Sampling on the actual substrate is important to verify that PMS 1355 C delivers the intended effect in the final environment, as both material and lighting can influence color perception.

PMS 1355 C is intended as a brand color reproduction standard, not a formula for touch-up or repair work. If you need an exact match to an existing finish for spot applications, you should send a physical part for color matching instead of referencing the Pantone code alone. This ensures the result aligns closely with your specific substrate and finish, as using PMS 1355 C as a reference may not provide a satisfactory match for touch-up situations.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 1355 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 1355 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.