RAL 6010 Grass Green Paint

Send a physical sample or provide the OEM powder code when any of the following apply:

• Acceptance will be judged against an existing coated part, not the RAL fan deck.
• Large, high-visibility areas or parts butting to existing pieces where small hue/shine differences will be noticed.
• You need the sheen or texture to match an existing powder coat (e.g., low-gloss or textured) and you are buying liquid paint.
• The installed parts have weathered/faded; the RAL 6010 standard represents a new target.
• You know the exact powder brand/code originally used (provide the OEM powder code for best alignment).

What to include with your request:

• Note the target: "Match to my sample" or "Match to OEM powder code," with RAL 6010 listed for context.
• Desired acceptance method (compare to your part vs. compare to the RAL 6010 standard chip).
• Any sheen requirement (gloss units at 60 degrees if known) and process constraints (powder vs. liquid).
• A clean, representative sample (flat area ~1×1 inch or larger).

Result: we will target your sample or OEM reference within agreed tolerances; this reduces rework and dispute risk.

Before placing the order, confirm the exact RAL code and name together: "RAL 6010 Grass green."

• Double-check the last two digits; 6005, 6009, and 6011 are common misreads near 6010.
• Verify against an official RAL chip or licensed digital reference; do not rely on on-screen color.
• If your only reference is an existing part marked "6010," compare it to the RAL 6010 chip. If it differs, treat it as a sample match rather than a standard RAL order.
• On the PO or work order, state the acceptance basis: "Color target RAL 6010 (compare to RAL standard)" or "Color target RAL 6010 (compare to existing part XYZ)."

Note: The RAL code defines the color target, not the coating process. Specify process, sheen, and texture separately.

Possibly not. RAL 6010 defines color only; gloss and texture are not part of the code. Differences in sheen/texture (especially powder vs. liquid) are a frequent reason repairs are rejected.

• For critical or inspected work: specify the required sheen (gloss units at 60 degrees) and any texture, or send a sample so we can target both color and appearance. State the acceptance method on the PO.
• For small chips or low-visibility repairs: a standard RAL 6010 in the closest available sheen is often sufficient.
• If the existing part's gloss is unknown, measure it with a gloss meter or provide a cut sample to minimize risk.

Action: decide whether acceptance compares to the RAL standard chip or to your existing part, then order a standard match or request a sample-based match accordingly.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL6010 Grass Green is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL6010 Grass Green enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL6010 Grass Green in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.