Looking for color by Hex, RGB, CMYK, or Lab?

RAL 6009 Fir Green Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

RAL6009 Fir Green is a deep, very dark green formulated for unobtrusive, robust surface coverage in industrial and architectural environments. With an extremely low LRV of 2.81 and a L* of 19.27, it absorbs most light, often appearing near-black except under strong lighting. The hue angle (144.31 degrees) and negative 'a' value show its cool blue-green tendency, while moderate chroma (11.45) provides noticeable but subdued color without saturation. The undertone remains close to neutral, with only modest green chroma, and the finish will strongly impact its appearance-matte looks almost black, while gloss reveals more green.

Typical applications for RAL6009 include architectural metalwork, site furniture, railings, fencing, equipment, or structural elements where a functional, receding tone is desired. Its neutral, technical character supports low-visibility while preserving a subtle green identity. Due to very low brightness, it often appears nearly black in dim environments. Gloss finish can accentuate the green, while matte maximizes low-visibility. For projects needing higher visibility, compare RAL6009 with related deep greens. Uniform coverage is essential to avoid highlighting surface variations.

Digital approximations
Values
HEX: #243225
RGB: 36, 50, 37
LAB: 19.3, -9.3, 6.7
Insights
- The extremely low LRV (2.81) and L* value (~19) mean the color is perceived as almost black except under substantial lighting.
- Negative a (-9.3) and positive b (6.7) values quantify the distinct cool, green-blue tendency, with minimal warmth.
- Moderate chroma (11.45) keeps the color recognizable as green when viewed well-lit, but ensures it stays neutral and subdued.
Digital values are approximations.
Paint appearance varies by finish and lighting.

Similar colors:
- RAL 6012 Black Green Paint Black Green: Similar depth but with even less green chroma, reading closer to near-black.
- Tiger Drylac™ 049/50670 RAL 6005 Moss Green: Slightly lighter and warmer, with a stronger green identity in typical lighting.
- RAL 6020 Chrome Green Paint Chrome Green: Comparable in darkness, but with higher chroma and a touch more yellow, reading as a fuller green.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 6009 Fir Green Paint

When should I send a sample or OEM reference instead of ordering standard RAL 6009 Fir Green?

Send a sample or OEM reference when acceptance will be judged against an existing finish, not just the RAL target. RAL 6009 defines a color target, not the coating process, sheen, or texture.

  • Send a sample/OEM code if: the part is high-visibility, a large area will be repainted, there are strict inspection criteria, a specific OEM powder code exists, the existing part is weathered/faded, or the original sheen/texture is unknown.
  • Standard RAL 6009 is typically sufficient for: cross-material coordination where textures/sheens already differ, small chips/low-criticality touch-up, or when close visual harmony (not side-by-side equivalence) is acceptable.
  • What to include with your sample request: a clean representative part/panel, whether to match "as-is" or to the RAL standard, the required gloss (60 degrees GU if known), substrate and coating technology if available, and any acceptance criteria (viewing distance, lighting, inspection method).

This avoids returns caused by sheen/texture differences or weathered color shifts.

Will repairs in RAL 6009 Fir Green be rejected if the sheen doesn't match?

Often yes. The RAL 6009 code specifies color only; gloss and texture are not defined. On very dark colors like RAL 6009, small gloss differences are highly visible and a common cause of rejection.

  • Confirm and specify gloss in 60 degrees gloss units (e.g., ~20 GU matte, ~60 GU satin, ~85 GU gloss). If unknown, measure the existing part or send a sample.
  • Match sheen first, then color: powder vs. liquid coatings can differ in microtexture, which changes perceived color. Specify the desired sheen for the touch-up/topcoat.
  • Validate before release: apply to a test panel, allow full cure, and compare under neutral lighting next to the part. Do not judge wet or uncured paint.

Defining gloss upfront greatly reduces acceptance risk for RAL 6009 Fir Green repairs.

How do I make sure I'm ordering RAL 6009 Fir Green and not a similar RAL green?
  • Specify the full reference on all documents: "RAL Classic 6009 Fir Green". Avoid abbreviations that omit the system or digits.
  • Cross-check drawings and POs: RAL 6009 Fir Green is distinct from nearby codes like RAL 6005 Moss Green or RAL 6007 Bottle Green.
  • Verify the system: do not substitute RAL Design or RAL Effect numbers. If a supplier lists an internal or OEM code, confirm it maps to RAL Classic 6009.
  • Do not rely on screen previews for approval; use the official RAL Classic standard or a production sample if color acceptance is critical.
Can I apply RAL 6009 Fir Green paint over an existing powder-coated surface?

Yes, with proper surface prep and product selection. Color alone doesn't ensure adhesion or visual continuity.

  • Prep: clean/degrease thoroughly, degloss by scuff sanding to a uniform dull finish, remove loose/defective coating, and solvent-wipe per product instructions.
  • Adhesion check: perform a small test area or a cross-hatch test. If adhesion is marginal, use a compatible adhesion-promoting/epoxy primer. Spot-prime any bare metal.
  • Sheen/texture: existing powder orange peel or texture will remain visible; match gloss to minimize contrast. Expect touch-up boundaries to be visible on large, flat areas.
  • Scale guidance: small chips or functional protection typically accept standard RAL 6009; for large area repaints or cosmetic panels, consider a sample- or OEM-based match and align on gloss before full production.

Allow full cure before evaluation and acceptance.

When will I receive my paint matching RAL6009 Fir Green? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL6009 Fir Green, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL6009 Fir Green for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL6009 Fir Green is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL6009 Fir Green?
The RGB values for RAL6009 Fir Green are 49, 60, 52 and the HEX code is #313C34. The LRV for RAL6009 Fir Green is 4.15. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL6009 Fir Green made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL6009 Fir Green enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL6009 Fir Green?
Many types of paint are available for RAL6009 Fir Green with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL6009 Fir Green?
The RAL6009 Fir Green is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL6009 Fir Green?
The need for primer for RAL6009 Fir Green depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL6009 Fir Green to a different color from another paint company?

While we can provide RAL6009 Fir Green in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.