RAL 6012 Black Green Paint

Use this quick decision guide to avoid acceptance issues on RAL 6012 Black Green:

• Inspection will be against the RAL standard (fan deck/reference) and minor sheen/texture differences are acceptable (e.g., cross-material coordination, small functional touch-ups): a standard RAL 6012 is typically sufficient.
• Inspection will be against an existing coated part (powder-coated panel, machine housing, etc.), or the surface is high-visibility/large-area: request a custom match to the actual part or provide the OEM/powder manufacturer code if known.
• Gloss/texture must align with adjacent parts (common for powder vs liquid differences): provide a physical sample and specify the required gloss level and texture.
• Dark colors like RAL 6012 amplify sheen differences. Expect visible contrast if mixing powder and liquid or different gloss levels.

Action items: confirm the acceptance target (RAL standard vs sample piece), state required gloss/texture, and share any OEM/powder code to minimize risk.

Clarify these points to ensure the delivered RAL 6012 Black Green meets acceptance:

• Acceptance target: Are you matching the RAL standard or an existing coated part?
• Finish requirements: Specify gloss level and any texture (smooth/fine texture). RAL defines color, not sheen or texture.
• Process: State whether the job is powder or liquid paint and the chemistry/performance class required.
• If matching an existing part: Provide a physical sample or the OEM/powder manufacturer code used originally.
• Inspection method: Confirm how parts will be judged (visual under agreed lighting and distance, and whether gloss will be measured).

Suggested PO fields: "Color: RAL 6012 Black Green; Target: RAL standard or customer sample; Gloss: [value or range]; Texture: [describe]; Process/Chemistry: [powder/liquid, type]; Substrate/Primer: [if relevant]; Inspection: [visual criteria]; Quantity/Packaging: [details]."

Select based on defect size, surface, and sheen sensitivity:

• Paint pen: Hairline scratches, small nicks on smooth surfaces; fast, controlled application. Not ideal for textured powder.
• Brush-in bottle: Chips up to ~nickel size, edges and hardware; dab and feather. Choose the closest gloss level to the part to reduce halo on this dark shade.
• Aerosol spray: Areas larger than palm-size or when blending is needed; multiple light coats for a uniform film. Better for approximating texture via technique (light spatter), though an exact texture match to powder is unlikely.

Notes for RAL 6012 Black Green: verify gloss before ordering touch-up; dark near-black colors make sheen differences obvious. Test on a hidden area and adjust technique. If appearance must match an existing powder-coated part, consider submitting a sample for a closer finish alignment.

Coverage depends on product type, film build, surface profile, and application method, but these planning ranges are typical:

• Liquid coatings (per coat): ~300-400 sq ft/gal at ~1.5 mil DFT on smooth, primed surfaces. Plan 15-30% extra for spray loss and part geometry.
• Aerosol: ~12-20 sq ft per can per coat, depending on technique and part complexity.
• Touch-up bottles/pens: Intended for localized repairs (square inches, not square feet).
• Coats: Dark near-black colors like RAL 6012 usually hide well over a mid-gray primer; over light/uneven substrates, plan an additional coat for uniformity.
• Texture/rough profile: Castings, perforations, and textured powder surfaces may require 20-50% more material.

Always verify target DFT and finish requirements for your system, spray a test panel, and adjust quantity based on actual part geometry and acceptance criteria.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL6012 Black Green is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL6012 Black Green enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL6012 Black Green in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.