Looking for color by Hex, RGB, CMYK, or Lab?

RAL 3015 Light Pink Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL3015 Light Pink is a moderately light, slightly warm pink designed for specification-driven industrial and maintenance settings. With an L value of 71.23 and LRV of 42.52, the color offers moderate lightness and retains good visibility and contrast. A hue angle of 13 along with a positive a (21.13) and low b (4.88) produces a warm pink that avoids yellow, orange, or peach notes. Its 21.69 chroma provides a clear, definitive pink appearance that reads neither bold nor overwhelming. Finish variations may subtly increase vibrancy but generally do not shift the core hue or lightness.

RAL3015 Light Pink is primarily chosen where a recognizable, slightly warm pink is specified with a moderately light appearance, ensuring visibility without the higher intensity typical of saturated pinks. Commonly used on architectural metalwork, equipment housings, structural elements, field touch-ups, and maintenance repaints, this color suits clean, technical looks in coded or defined environments. For touch-ups, surface preparation is important to avoid contrasting gloss or sheen, especially alongside original powder coated finishes. For large exposed areas where color accuracy is stringent, verification with physical samples is recommended due to potential finish-based variation.

Digital approximations
Values
HEX: #D7A0A6
RGB: 215, 160, 166
LAB: 71.2, 21.1, 4.9
Insights
- The L value (71.2) and LRV (42.5) support moderate lightness-pink is clearly visible, not washed out.
- The a value (21.1) combined with low b (4.9) results in a pink that avoids orange, keeping a recognizable warmth.
- RGB values show a balance between strong red, moderate green, and modest blue, preventing either coolness or a highly saturated effect.
Digital values are approximations. Paint appearance varies by finish and lighting.

Similar colors:
RAL 3014 Antique Pink Paint Old Pink - Slightly darker and less chromatic, yielding a more muted appearance.
RAL 3017 Rose Paint Rose - Deeper and more saturated; reads as a stronger, less neutral pink.
RAL 3018 Strawberry Red Paint Strawberry Red - Darker and much more chromatic, appearing bolder and more vibrant.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 3015 Light Pink Paint

Does ordering RAL 3015 Light Pink guarantee a match to our existing powdercoated parts?

No. RAL 3015 Light Pink defines a color target, not a coating process. Powder and liquid coatings can look different even when both are made to RAL 3015 due to gloss level, texture, film build, resin/pigment chemistry, cure schedule, and aging.

Decide based on your acceptance criterion:

  • If acceptance is against the RAL standard (fan deck/standard reference): Order RAL 3015 in the required product and specify the gloss you need. Expect normal variation from finish differences.
  • If acceptance is against an existing part or OEM powder: Provide the OEM powder information (manufacturer, series, color code, gloss, texture) or send a physical part/panel for a sample-based match. This reduces rework and dispute risk.

Standard RAL is typically sufficient for crossmaterial coordination and lowcriticality touchups. For highvisibility surfaces, large areas, or inspectioncritical builds, use a sample/OEMbased match.

When should we send a physical sample for RAL 3015 Light Pink instead of ordering the standard RAL color?

Send a sample or provide OEM powder details when any of the following apply:

  • Acceptance will be judged against an existing coated part or assembly.
  • The original finish has a specific gloss/texture you need to replicate (e.g., fine texture, matte, wrinkle).
  • The part is highvisibility or largearea where small color/gloss shifts will be obvious.
  • The existing item is aged or faded and you need to blend to it.
  • A known OEM powder code exists and must be matched across materials.

Include with your sample: the note "match to this part" and "target RAL 3015," desired gloss/texture, substrate/type of paint you plan to order, and how acceptance will be evaluated (e.g., visual match under shop lighting). This minimizes rework and return risk.

How do we avoid ordering the wrong color when the spec says RAL 3015 Light Pink?

Use this checklist before ordering:

  • Confirm it is a RAL Classic code (four digits: 3015) and the name "Light Pink." Do not substitute close numbers such as 3014 or 3016.
  • Verify the code and name on the drawing/PO match a physical RAL Classic fan deck or certified reference-do not rely on onscreen previews.
  • Check for any finish notes (gloss/texture) or instructions like "match existing part," which changes the acceptance target.
  • Ensure the code is not from another RAL system (e.g., RAL Design/Effect) or an OEM's internal number.

If any detail is uncertain-especially the finish requirement or acceptance target-pause and request clarification or provide a sample.

What prep is recommended to touch up installed equipment in RAL 3015 Light Pink?
  1. Identify substrate and existing coating (powder vs liquid) to choose compatible primer/topcoat.
  2. Clean thoroughly: wash with detergent, rinse, dry; solventwipe with a compatible cleaner. Test a small area to ensure the solvent does not soften the coating.
  3. Remove rust and loose coating; feather edges. Fill pits or gouges as needed and sand smooth.
  4. Scuff sand the repair zone to degloss and improve adhesion (e.g., 320-600 grit). Dust off and wipe clean.
  5. Prime any bare substrate with a compatible primer; allow recommended dry time.
  6. Mask, then apply RAL 3015 Light Pink in light, even coats. Observe recoat windows and allow full cure.
  7. Expect some sheen/texture variation versus surrounding powder coat; for inspectioncritical areas, consider a samplebased match and a larger blended repair.
When will I receive my paint matching RAL3015 Light Pink? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL3015 Light Pink, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL3015 Light Pink for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL3015 Light Pink is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL3015 Light Pink?
The RGB values for RAL3015 Light Pink are 219, 160, 169 and the HEX code is #DBA0A9. The LRV for RAL3015 Light Pink is 43.02. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL3015 Light Pink made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL3015 Light Pink enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL3015 Light Pink?
Many types of paint are available for RAL3015 Light Pink with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL3015 Light Pink?
The RAL3015 Light Pink is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL3015 Light Pink?
The need for primer for RAL3015 Light Pink depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL3015 Light Pink to a different color from another paint company?

While we can provide RAL3015 Light Pink in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.