RAL 1024 Ochre Yellow Paint

Send a sample when acceptance depends on matching an existing coated part, not just the RAL standard. RAL 1024 defines the target color, not the coating process, so powder vs. liquid, gloss, and texture can differ. Choose sample-based matching if any of the following apply:

• You must match an existing part/assembly exactly (adjacent panels, repaired sections).
• The surface is high-visibility or subject to strict inspection criteria.
• You know an OEM/powder code (e.g., specific resin/texture). Include it so we can align finish and sheen.
• Large-area repaints where small differences become obvious.

What to include with your sample: a flat area at least 2×2 in, notes on gloss (60 degrees GU target or range if known), any texture, and whether acceptance will be judged under specific site lighting.

Most repair rejections are sheen-related, not color-code errors. RAL 1024 specifies color only; powder-coated parts often have different gloss or texture than liquid touch-up paints. To manage risk:

• Specify the desired sheen (e.g., gloss, semi-gloss, satin, matte) or a 60 degrees GU range if available.
• Match the surrounding finish type (smooth vs. textured) whenever the repair is adjacent and visible.
• Evaluate a test spray under the same lighting and viewing angle as inspection (glancing angles exaggerate gloss differences).
• For critical repairs, provide a part for sample-based match so color and sheen can be tuned together.

Often yes. Standard RAL 1024 is typically adequate when components are on different materials or textures and are not directly adjacent. This is appropriate for:

• Cross-material coordination where finishes already differ (e.g., powder-coated cabinet next to painted conduit or brackets).
• Low-criticality or functional touch-ups where close visual harmony is sufficient.

Use a sample-based match if surfaces are contiguous, highly visible, or will be inspected side-by-side under consistent lighting.

Primer choice affects adhesion, corrosion resistance, and coverage (not the RAL 1024 target). Prepare by degreasing, removing rust/oxides, and sanding/feathering edges. Then:

• Carbon steel: use a corrosion-resistant epoxy or zinc-rich primer. For field touch-up, a fast-cure epoxy or alkyd metal primer is common.
• Galvanized steel: remove oils/white rust; use a wash/etch primer or galvanized-compatible epoxy before topcoat.
• Aluminum: scuff-sand; apply a chromate-free etch or epoxy primer for adhesion.
• Previously coated surfaces: clean, degloss/scuff, spot-prime bare areas with a compatible primer; verify compatibility with a small test.
• Rigid plastics (ABS, PVC, etc.): clean thoroughly; use a plastic adhesion promoter then a suitable primer.

For ochre yellows, a medium-gray primer can improve hide and color uniformity versus white or very dark primers.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL1024 Ochre Yellow is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL1024 Ochre Yellow enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL1024 Ochre Yellow in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.