Looking for color by Hex, RGB, CMYK, or Lab?

RAL 1032 Broom Yellow Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL1032 Broom Yellow is a vivid, energetic, and highly visible yellow from the RAL Classic collection. With moderate lightness (L=70.59, LRV=41.59), this color delivers strong visibility without being overly pale. It is distinctly warm, leaning toward orange (a=12.54, b=78.09, hue angle 80.88 degrees), and features high chroma (79.09) for a saturated, pure yellow effect. The color has a clear, strong character with orange-yellow undertones. Gloss finishes heighten intensity and reflectivity, while matte finishes soften the brightness but retain color integrity.

RAL1032 Broom Yellow is designed for assertive and unmistakable visibility, making it ideal for industrial safety markings, equipment identification, and architectural accents such as railings and signage. Its moderate lightness supports effective marking and identification without excessive glare. The strong saturation and warmth can be influenced by surrounding colors and lighting, with matte finishes deepening the color and gloss boosting brightness. For color consistency across different materials, especially between adjacent metals and plastics, sampling is advisable. This RAL code is well-suited for maintenance and touch-up where functional identification and safety are key needs.

Digital approximations
Values
HEX: #E1A200
RGB: 225, 162, 0
LAB: 70.6, 12.5, 78.1
Insights
- The high b (78.1) and chroma (79.09) values signify a strong, saturated yellow with clear orange undertones.
- LRV of 41.59 and L=70.6 position this color as moderately light, providing strong contrast on darker surfaces.
- Significant a (12.5) and hue angle (80.88 degrees) reinforce the warm, yellow-orange character, enhancing visibility.
Digital values are approximations. Paint appearance varies by finish and lighting.

Similar colors:
- RAL 1023 Traffic Yellow Paint Traffic Yellow: lighter, slightly less saturated, and more neutral.
- RAL 1003 Signal Yellow Paint Signal Yellow: higher chroma, but slightly cooler and less orange.
- RAL 1018 Zinc Yellow Paint Zinc Yellow: similar lightness but noticeably less warm and less saturated.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 1032 Broom Yellow Paint

Our spec says "Finish: RAL 1032 Broom Yellow." Is ordering standard RAL 1032 sufficient?

It depends on how acceptance will be judged. RAL 1032 defines the color target, not the coating process.

  • If acceptance is against the RAL Classic standard (fan deck/standard reference) and you specify the sheen, ordering standard RAL 1032 in the required gloss is appropriate.
  • If acceptance is against existing parts (e.g., a prior powder coat batch) or an OEM powder code, do not assume a standard match will pass. Send a sample or specify the OEM powder code for a process-aware match.

To avoid disputes, include in the PO: the acceptance basis (RAL standard vs. existing part), required gloss/texture, substrate, and coating type (powder or liquid). Powder and liquid coatings can match color but differ in sheen/texture, which may affect acceptance.

When should I send a sample for RAL 1032 Broom Yellow instead of ordering the standard color?

Send a sample or specify an OEM powder code when the risk of rejection is high:

  • High-visibility cosmetic surfaces or large-area repaints.
  • Strict inspection criteria (e.g., instrumental tolerance or customer sign-off).
  • Matching an existing coated part (including weathered/aged pieces) rather than the RAL standard.
  • Known OEM powder formulation or texture requirement that a standard liquid paint will not replicate.

What to provide with the sample:

  • Clean, representative piece (minimum 2×2 in / 50×50 mm) showing the target color, plus the required gloss/texture.
  • Acceptance basis (visual vs instrument), any tolerance, lighting/viewing conditions, and substrate/coating process details.
  • If available, OEM powder code and gloss level.

Custom matching may add cost/lead time but reduces rework and return risk.

How should I prep for field touch-up in RAL 1032 Broom Yellow on a powder-coated part?

Proper prep prevents adhesion issues and visible edge mapping:

  1. Confirm acceptance target: standard RAL 1032 vs. match to the existing part. Standard touch-up is acceptable for small chips where close harmony is sufficient.
  2. Clean: remove oils, dirt, and silicones with detergent and water; rinse and dry. Wipe with compatible solvent (e.g., isopropyl alcohol). Avoid strong solvents that soften powder.
  3. Corrosion control: remove rust to bright metal; feather damaged edges. Spot-prime bare metal with a compatible primer.
  4. Abrade: scuff surrounding area to a uniform dull finish (e.g., 320-600 grit) to promote adhesion without cutting through the powder.
  5. Mask smartly: limit the repair footprint; hard tapelines can telegraph. For best appearance, taper coatings slightly past the defect.
  6. Apply: use thin, even coats of RAL 1032 touch-up. Match sheen to the surrounding area if possible; note that smooth liquid touch-up will look different than textured powder.
  7. Cure/recoat: follow product TDS for flash, recoat, and full cure. Avoid early handling that can gloss-burnish the repair.
  8. Verify: after cure, inspect under the agreed lighting. If surrounding parts are aged/faded, a custom match may be required for larger areas.
When will I receive my paint matching RAL1032 Broom Yellow? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL1032 Broom Yellow, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL1032 Broom Yellow for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL1032 Broom Yellow is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL1032 Broom Yellow?
The RGB values for RAL1032 Broom Yellow are 224, 163, 37 and the HEX code is #E0A325. The LRV for RAL1032 Broom Yellow is 42.24. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL1032 Broom Yellow made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL1032 Broom Yellow enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL1032 Broom Yellow?
Many types of paint are available for RAL1032 Broom Yellow with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL1032 Broom Yellow?
The RAL1032 Broom Yellow is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL1032 Broom Yellow?
The need for primer for RAL1032 Broom Yellow depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL1032 Broom Yellow to a different color from another paint company?

While we can provide RAL1032 Broom Yellow in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.