RAL 1013 Oyster White Paint

Choose a custom match when acceptance will be judged against an existing coated part or strict appearance criteria. RAL 1013 defines a target color, not a coating process, sheen, or texture.

Send a sample or specify the OEM powder code when:

• Inspection compares to an existing part and the sheen/texture must look the same.
• High-visibility surfaces or large-area repaints where small differences will be noticeable.
• A known OEM powder or texture code is specified on the drawing or PO.
• There are tight acceptance tolerances or prior rejections due to appearance.
• The part to match has aged, yellowed, or was produced with unknown materials.

A standard RAL 1013 order is typically sufficient when:

• Cross-material coordination where textures or sheens already differ (e.g., powder frame and liquid-painted panel) and this is acceptable.
• Low-criticality touch-ups such as chips where functional protection is the priority.
• Close visual harmony is acceptable and not inspected against a specific legacy part.

To reduce risk with a custom match, provide: a physical sample (flat area if possible), target sheen (60 degrees gloss units or descriptive sheen), texture requirement, substrate, intended film build, any OEM/powder code, and service age/exposure. Note: As a light off-white, RAL 1013 is sensitive to undercoat color and film build; specify primer color and required hiding to maintain appearance consistency.

Not reliably. Many repairs fail inspection due to sheen or texture differences even when the color is on target. RAL 1013 specifies color only.

To control acceptance risk:

• Specify the required sheen on the PO (e.g., matte, satin, semi-gloss, or gloss, ideally with a 60 degrees gloss range).
• Match surface texture where relevant (smooth, fine texture, orange peel level).
• Request a test panel or sprayout in the required sheen and evaluate next to the part under the actual lighting.
• Keep application variables consistent; film build and curing can shift gloss and perceived color.

If the existing part's sheen is unknown or aged, send a sample or request multiple sheen panels for side-by-side evaluation. When sheen/texture alignment is not critical (small chips, hidden areas), a standard RAL 1013 in a practical sheen may be acceptable.

Yes, with proper prep and product selection. Expect sheen/texture differences when liquid paint is used over a textured powder coat.

Recommended workflow:

• Clean and degrease thoroughly; remove silicone and wax residues.
• Abrade to a uniform dull finish (scuff-sand); feather any damaged edges.
• Address corrosion: remove rust and spot-prime bare metal with a compatible primer.
• Check adhesion of the existing coating; if poorly adhered or chalked, remove or stabilize before coating.
• Apply an adhesion-promoting primer if bonding to intact powder coat is required.
• Select the coating chemistry and sheen appropriate for service conditions and desired appearance.
• Do a small test patch or panel to confirm adhesion, hiding, and sheen match before full application.

Operational notes: RAL 1013 is a light color; plan for adequate hiding over dark substrates (primer may be required). Follow recoat windows and cure times per the tech data sheet. If the acceptance standard is visual match to an existing part, consider sending a sample to align sheen and texture.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL1013 Oyster White is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL1013 Oyster White enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL1013 Oyster White in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.