Match of Valspar™ 337-1 Touch Of Gray *

Yes. MyPerfectColor custom spray paint matched to Valspar 337-1 Touch Of Gray is a practical choice for small parts and hardware where a smooth spray finish is easier than brush application. It can be used for items such as switch covers, vents, speaker grilles, knobs, trim pieces, and brackets.

For best results, clean the part well, remove loose debris, and apply light, even coats. The final appearance can vary with the part's texture and the finish you choose, so a test piece is a good idea when the item will be seen up close.

Choose the finish based on how the part will be used and how much shine you want the matched color to have. More gloss is usually easier to clean and more reflective, while lower gloss can reduce shine and may look less reflective on the finished item.

The color reference Valspar 337-1 Touch Of Gray does not define the finish by itself, so the sheen must be selected separately when you order MyPerfectColor paint. If you are coating a part that sits next to an existing painted surface, try to match the existing sheen as closely as possible.

Often yes, but plastics vary a lot, so the actual material matters. MyPerfectColor spray paint sticks well to most plastics, but you should test the exact part first because some plastics are harder to coat than others.

If you want better adhesion, use the MyPerfectColor primer for acrylic enamel before painting. Clean the surface first, remove any mold release or contamination, and make sure the plastic is dry before you spray.

Use light, even coats instead of one heavy pass. Hold the can at a steady distance, keep it moving, and overlap each pass slightly so the color builds evenly across the surface.

Heavy spraying can cause runs, uneven sheen, or a muddy look on the finished part. If the substrate is dark, glossy, or uneven, plan on applying additional light coats rather than trying to cover it all at once.

Start by cleaning off grease, dust, and other contamination. On metal, remove rust or loose material before painting, and on an existing coating, scuff any glossy or slick areas so the new paint can bond better.

The condition of the old surface matters because gloss, texture, and wear can change how Valspar 337-1 Touch Of Gray looks after it is sprayed. If the current coating is aged or inconsistent, test a small area first so you can confirm adhesion and appearance before doing the full part.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 337-1 Touch Of Gray enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 337-1 Touch Of Gray you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 337-1 Touch Of Gray in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.