Pantone™ PMS 620 U

Pantone PMS 620 U is a visual color reference, not a finish specification. When you apply PMS 620 U as paint, the chosen finish will change how the color is perceived.

Gloss finishes tend to reflect more light, which can make PMS 620 U appear brighter and slightly more saturated. Satin or semi-gloss finishes usually appear more balanced and closer to the printed Pantone reference under typical display lighting. Matte finishes absorb more light and can make PMS 620 U look darker or flatter.

If visual brand accuracy matters, evaluate a sample of PMS 620 U in the actual finish and lighting where it will be used before committing to production.

A typical custom spray can of Pantone PMS 620 U covers about 20 square feet with one light, even coat. Actual coverage can vary based on surface texture, application technique, and the number of coats required.

Smoother, sealed surfaces use less paint, while rough or porous materials require more. Highly saturated Pantone colors like PMS 620 U may need additional coats to achieve uniform color and hide.

For planning purposes, estimate your total area, decide how many coats you need, and add extra cans to account for testing and application variation.

Yes. Pantone PMS 620 U is commonly used on prototypes and concept models where visual brand alignment is required. The goal in these cases is to match the Pantone color target as closely as possible for review and feedback.

For early-stage models, spray paint is often the fastest way to evaluate overall color impact. For smaller parts or detailed areas, paint pens or brush-in-cap bottles may be more practical.

Always review the finished prototype under the lighting conditions where it will be presented, since lighting and substrate can change how PMS 620 U is perceived.

Ordering a sample of Pantone PMS 620 U is strongly recommended when the color must pass brand or stakeholder approval. A sample allows you to confirm the visual match on the actual substrate, in the selected finish, and under installed lighting.

This step is especially important for large, high-visibility displays or multi-material builds, where the same color may look different across surfaces.

Once PMS 620 U is approved in sample form, you can proceed with larger quantities with more confidence and fewer surprises.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 620 U. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 620 U in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.