Pantone™ PMS 3292 U

Yes. PMS 3292 U is matched to the same Pantone color target regardless of finish, but changing sheen can change how the color is perceived.

Glossier finishes reflect more light and can make PMS 3292 U appear deeper and more saturated, while matte or flat finishes scatter light and can look lighter or duller by comparison. When you compare samples, a matte and a gloss version may look like different colors even though the underlying match is the same.

If brand approval is required, evaluate samples in the same finish that will be used in the final application.

Coverage for PMS 3292 U spray paint is approximately about 20 square feet per can under typical conditions.

Actual coverage depends on surface texture, color of the substrate, application technique, and the number of coats. Highly saturated Pantone colors like PMS 3292 U often need additional coats to achieve even hide, especially over light or contrasting backgrounds.

For planning purposes, assume multiple coats and order extra material if consistent color density is critical.

PMS 3292 U can appear to shift depending on lighting type, brightness, and viewing angle. Different light sources emphasize different parts of the color, which can change how saturated or dark it appears.

This is normal behavior and not a mismatch. For accurate evaluation, view PMS 3292 U under the same lighting conditions where it will be used, such as retail lighting, exhibit lighting, or daylight.

Final color approval should always be done in the installed environment when possible.

The Safety Data Sheet is based on the paint product and formulation, not the Pantone color itself. PMS 3292 U does not have a unique SDS.

To find the correct SDS, select the specific product type you are ordering, such as spray paint or another paint format, and then access the SDS for that product from the SDS library.

Always reference the SDS that matches the exact product you will be using.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 3292 U. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 3292 U in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.