Pantone™ PMS 2347 C

The finish you select for Pantone PMS 2347 C can strongly influence how the color is perceived. A gloss finish will make PMS 2347 C appear brighter and more saturated, which can amplify its bold yellow impact. Satin or matte finishes may mute the vibrancy and make the color look less intense and slightly darker, especially in lower light. Always evaluate PMS 2347 C in the intended finish and lighting conditions to confirm it delivers your desired brand impact before full production.

For a consistent look when using Pantone PMS 2347 C on large areas, apply each coat evenly and maintain a consistent technique across the surface. Highly saturated yellows like PMS 2347 C may have lower hide, so plan for extra coats and allow full drying between layers. Always use the same batch of product and equipment to prevent visible shifts. Lighting and substrate color can also affect the outcome, so test on a sample area first to confirm uniformity before proceeding with the complete installation.

Pantone PMS 2347 C defines a color target but does not specify the original finish, gloss, or substrate of the existing part. Variations in sheen, age, and material can create visible mismatches even when PMS 2347 C is used as the reference. For touch-ups, matching to the actual surface conditions is needed, not just the Pantone number, so PMS 2347 C should not be used as a repair or maintenance specification.

Sampling Pantone PMS 2347 C is recommended for large installations, high-visibility brand projects, or when the painted surface will be viewed under critical or varied lighting. This deep, saturated yellow can shift appearance based on finish, substrate, and light, so a sample allows you to check color accuracy and coverage expectations before committing to a full order. This step helps manage brand risk and ensures alignment with brand guidelines.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2347 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2347 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.