Pantone™ PMS 2007 C

For PMS 2007 C, make sure to compare all samples under the same lighting conditions and on identical substrate materials. Allow all coatings to fully dry and cure, as color and gloss can shift during drying. Since PMS 2007 C is highly saturated, both finish and lighting can influence its yellow-green appearance. Judging color before coatings are properly cured may result in an inaccurate evaluation. Always assess final color under intended viewing conditions before signing off on approval.

The need for a primer when using PMS 2007 C depends on the substrate material, the type of paint, and project requirements. A primer is recommended when painting over bare metal, plastic, raw wood, or dark surfaces to improve paint adhesion and achieve a consistent color. If you are unsure, refer to the paint manufacturer''s primer guidance for best results with PMS 2007 C. Using a primer can help achieve a uniform, brand-consistent finish, especially for high-visibility applications.

PMS 2007 C is often specified as a standard target in fabrication for signage, brand displays, and exhibits. Specifying the PMS code ensures brand consistency and visual impact across different elements. When using PMS 2007 C, it is important to apply the color to actual project substrates and view under the intended lighting to confirm the match. This color is selected for its bold, high-visibility characteristics in many branding and marketing environments.

PMS 2007 C is a vivid, highly saturated yellow-green which may not fully cover contrasting or dark surfaces in a single coat. For most brand-facing projects, plan for at least two coats to ensure uniform color. Using a suitable white or light-colored undercoat helps achieve an even, vibrant appearance with fewer coats, which is important when consistency is critical for branding or displays.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2007 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2007 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.