Pantone™ PMS 7483 C

The durability of PMS 7483 C spray paint depends on proper surface preparation, the type of substrate, use of primers or topcoats, and local environmental conditions. For best results, ensure the surface is clean, dry, and primed if needed. If outdoor or high-contact use is expected, consider a clear protective topcoat to enhance resistance to abrasion and weather. Selecting the right paint type for your exposure needs is key to maintaining the intended PMS 7483 C appearance on-brand.

When applying PMS 7483 C paint to metal or powder-coated parts, surface preparation is critical. Any gloss, contaminants, or loose coatings must be thoroughly removed to support adhesion. Scuff-sanding and cleaning the surface ensures even coverage and helps prevent peeling. The finish and texture of the original surface may affect the final color appearance of PMS 7483 C, so it is strongly recommended to test on a sample part first under your typical lighting conditions.

Yes, the texture of your surface can significantly influence how PMS 7483 C is perceived. Glossy or smooth finishes tend to reflect more light, often making PMS 7483 C look deeper and more saturated. Matte or textured substrates may diffuse light, causing the color to appear lighter or less rich. If precise brand color is essential, always evaluate PMS 7483 C on a representative sample of your intended substrate and finish.

Choosing the correct sheen for PMS 7483 C is important, as finish will alter the way the color is perceived. Higher sheens like gloss highlight depth and saturation, while matte and eggshell reduce reflectance and may subdue the impact of the color. Select a sheen that aligns with your brand standards, takes into account expected viewing distance, and is appropriate for the substrate being coated. Always verify the result on a physical sample before final production to ensure PMS 7483 C meets your expectations.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 7483 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 7483 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.