Pantone™ PMS 616 C

The durability of PMS 616 C spray paint depends on several factors: substrate preparation, choice of primer, topcoat options, and the environment where the paint will be used. For best results, surfaces should be clean, dry, and properly primed. Selection of a protective or clear topcoat is important if the painted surface will be handled frequently or exposed to sunlight, moisture, or abrasion. Always confirm that the type of spray paint and any topcoats are appropriate for the intended use conditions and exposure. If the application is subject to high wear or outdoor use, choose higher durability paint or coatings, and consult product specifications before ordering.

To get a consistent look with PMS 616 C over large surfaces, use the same paint lot for the entire area and plan your application to avoid overlapping dry edges. Apply multiple thin coats as needed to ensure even coverage, especially since lighter and muted colors may show substrate differences more easily. Maintain a steady spray distance and pattern, and work in sections that allow you to keep a wet edge. Evaluate the painted surface under your typical lighting to confirm color uniformity before the final coat dries.

PMS 616 C is often used in prototyping and concept models to align visuals with brand standards. For accurate evaluation, select a product format that best matches your prototype material and handling needs, such as spray paint for smooth, even finishes. After application, assess the color in the intended lighting and finish, comparing it to a physical Pantone reference if possible. This approach helps confirm that your model reflects the intended brand color outcome before full production.

Yes, when ordering PMS 616 C paint, you can select expedited production during checkout to help meet urgent deadlines. If you have a fixed or critical project delivery date, contact MyPerfectColor directly to discuss your schedule and confirm whether your timing needs can be met before placing your order.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 616 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 616 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.