Pantone™ PMS 580 C

The look of Pantone PMS 580 C can change noticeably under different lighting conditions. Natural daylight brings out the green cast, while warm interior lighting can make PMS 580 C appear more yellow. To ensure the color is suitable for your application, always evaluate PMS 580 C under the exact lighting where your final installation will be seen. This helps avoid surprises and maintains brand consistency across all environments.

For uniform PMS 580 C coverage on large areas, follow a consistent application method, such as spraying or rolling in even, overlapping passes. Plan your work so each coat is applied in a single session whenever possible. Use the same batch of mixed paint to reduce slight color shifts. Make sure the surface is properly prepared and primed, and apply the number of coats required for full coverage to help prevent patchy or uneven color.

Pantone PMS 580 C uses a specific code that identifies the color target for brand consistency. Pantone codes can have suffixes, such as 'C' for coated or 'U' for uncoated, which refer to how the color appears on different materials or finishes. Always check your brand guidelines and specify the correct suffix to make sure the final color matches your intended standard before ordering paint or coatings in PMS 580 C.

One spray can of PMS 580 C usually covers around 20 to 25 square feet per coat on a smooth, nonporous surface. The actual coverage depends on the surface texture, color being painted over, and application method. To estimate cans needed, calculate your total square footage and consider the number of coats recommended for full coverage with PMS 580 C. It is always wise to include extra material for test sprays and edges to help ensure consistent results.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 580 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 580 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.