Pantone™ PMS 4745 C

PMS 4745 C is a light tan with moderate saturation, so it generally covers more easily than highly saturated or vivid Pantone colors. However, the subtle tone may still be sensitive to base color and surface prep. For best results, start with a smooth, primed surface in a similar light neutral tone. Applying PMS 4745 C over dark or uneven bases may require additional coats to achieve a uniform appearance. Always allow adequate dry time between coats to evaluate coverage and visual consistency under your intended lighting conditions.

The SDS for Pantone PMS 4745 C paint is determined by the type of product and base formula, not the Pantone color code itself. To find the correct SDS, select the paint format and product type you plan to use (such as spray paint, paint pen, or housepaint) and consult the Safety Data Sheet library on the MyPerfectColor website. Reference PMS 4745 C for color and choose the SDS for the specific base or system you are ordering.

PMS 4745 C, like other Pantone PMS colors, may look different depending on the material or substrate used. Factors such as surface texture, absorption, sheen, and reflectivity all impact the final appearance. A color sample on metal may look warmer or glossier than the same formula on plastic or wood. For brand-critical projects, always evaluate PMS 4745 C on the actual materials and finishes you will use in your project, under your intended site lighting. This helps ensure brand consistency and alignment with Pantone color targets.

Painting plastics or low-energy surfaces with Pantone PMS 4745 C requires careful surface preparation for good adhesion. Plastics such as polypropylene or polyethylene often need specialty primers or adhesion promoters. Always test PMS 4745 C paint on a sample of your actual plastic component before full production to confirm bonding, finish quality, and color appearance. This helps reduce the risk of peeling, uneven coverage, or inconsistent color in your finished display or branded installation.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 4745 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 4745 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.