Pantone™ PMS 443 C

When using PMS 443 C in pop-ups or temporary retail spaces, evaluate the lighting where the color will be installed, as cool grays can shift visually under different conditions. Sample PMS 443 C on your actual substrate before large-scale rollout to confirm you are satisfied with the color's appearance. For brand consistency, use consistent finishes across all elements, and choose coatings that offer the right durability for expected traffic and handling. Confirm all samples have fully dried or cured before approving the color match.

For even coverage with PMS 443 C across large surfaces, always mix all material needed for a continuous section before starting. Maintain a consistent application technique and spray pattern or brush method throughout the job. Plan for adequate number of coats, as some Pantone colors may need additional layers to reach full opacity. Avoid overlapping wet and dry sections, and work in controlled lighting to spot and correct any inconsistencies as you go.

Compare PMS 443 C color samples by placing them side by side on the same substrate type and finish planned for the final project. View samples under the same lighting that will be present in the installation environment. Allow all coatings to fully dry or cure, as PMS 443 C may look different when wet. Consistent comparison conditions reduce the risk of approval decisions based on temporary or misleading differences.

If you require guidance on the most suitable paint format for PMS 443 C, provide MyPerfectColor with details about your substrate, environmental exposure, and desired finish. This helps in recommending the best-performing product for your specific brand display or installation, ensuring the color delivers the intended results.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 443 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 443 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.