Pantone™ PMS 419 C

To achieve consistent results with PMS 419 C, always reorder the same product type, finish, and application method used previously. Variations in sheen (such as gloss versus matte) or paint technology can cause PMS 419 C to appear different, given its subtle undertones and very low reflectance. For best alignment between runs, use the same Pantone standard or previously approved sample as your reference, and confirm visual agreement under the intended lighting conditions before proceeding with a large order.

Sampling PMS 419 C is strongly recommended for high-visibility branding, large surface areas, or projects where lighting and finish will affect perceived color. Its near-black, muted character can shift with substrate and light, especially under strong illumination where the green undertone may be visible. Evaluate a sample on your actual substrate and in the planned lighting to confirm that PMS 419 C aligns with your visual expectations before committing to full production.

For pop-ups and retail, PMS 419 C offers a refined, near-black appearance valued for brand consistency. Assess durability needs, as high-traffic or high-contact areas may require a specific coating for abrasion resistance. Lighting is especially important, since PMS 419 C can look richer and greener under certain lights and nearly black in others. Always review a sample in the planned environment and finish to confirm performance and brand alignment before large installs.

When coating metal or powder-coated parts with PMS 419 C, proper prep is essential. Clean and scuff existing surfaces as needed, since gloss, texture, or prior coatings can affect the final appearance of this low-luster, near-black color. Because gloss levels can amplify subtle undertones or mute them, always test a small area or sample part before full production. Confirm the color under intended lighting to ensure that PMS 419 C meets your brand requirements.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 419 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 419 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.