Pantone™ PMS 399 C

PMS 399 C can look different across materials because each substrate type interacts with coatings in a unique way. Factors like surface texture, absorption, and reflectivity influence how the color is perceived. For example, a glossy metal may reflect more light and enhance the vibrancy of PMS 399 C, while a matte or porous wood may mute the olive undertones. For best results, always evaluate a sample of PMS 399 C on the same material and finish as your final application, under the lighting conditions where it will be seen.

PMS 399 C is a standardized brand color for consistent visual identity, not a formula for existing finishes or materials. If your goal is to match a specific surface or achieve touch-up grade results, Pantone code alone is not enough because the appearance can vary due to factors like material, finish, and age. For true touch-up matching, it is best to send a physical sample or part so the exact color and finish can be matched under controlled conditions. Pantone matching is ideal for branding and display components where the PMS color is the target for visual alignment rather than surface repair.

When ordering, always use the full Pantone code, including any suffixes like 'C' for coated, to specify your color target. 'PMS 399 C' refers to a specific shade and finish within the Pantone system. Relying only on the color name or omitting the code can lead to the wrong product being supplied, as colors with similar names may have distinct visual differences. Double-check that the Pantone code, including suffix, on your order matches your brand standard or project specification for PMS 399 C.

Consistent appearance of PMS 399 C on large surfaces depends on application method, number of coats, and environmental conditions. This muted yellow-green may require multiple coats to achieve full coverage and prevent patchiness, especially if applied over a light or uneven substrate. Use the same batch of paint and the same application technique throughout the area. Plan your work to avoid overlapping wet and dry edges, and evaluate the finish under installed lighting to confirm uniformity before final approval.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 399 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 399 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.