Pantone™ PMS 372 C

To order PMS 372 C accurately, provide the exact Pantone code 'PMS 372 C' including the full code and any suffix (such as 'C' for coated). Pantone codes are standardized identifiers that communicate a specific color target, and omitting or altering the code may result in receiving a different color. Always confirm with your brand or project requirements to match the intended Pantone specification, and use the exact code when placing your order.

A typical spray can of PMS 372 C covers about 20 to 25 square feet per coat on smooth, primed surfaces. Because PMS 372 C is a light, soft yellow-green with high lightness, additional coats or priming may be required for uniform coverage, especially over dark or colored substrates. To estimate your quantity, calculate your total project area, consider the number of coats needed for opacity, and factor in surface texture. Ordering extra helps ensure consistent results and avoids shortages during application.

Safety and VOC details for PMS 372 C depend on the specific paint product you choose, such as spray paint or urethane. Always read and follow the instructions and safety data sheet (SDS) for the product before use. Use appropriate ventilation, wear protective equipment as directed, and store materials safely. If safety or compliance is a concern for your project, review the product documentation or contact the manufacturer for specific information about VOC content and safe handling practices.

For metal or powder-coated surfaces, proper surface preparation is important when applying PMS 372 C. Clean and scuff the existing finish as needed to promote adhesion, and ensure the surface is free of oils and debris. Note that the gloss, color, or texture of the existing coating can affect the final appearance of PMS 372 C. Because this color is very light, priming may be needed for best coverage and uniformity. Whenever possible, test a sample first to confirm the result meets your expectations under project lighting conditions.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 372 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 372 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.