Pantone™ PMS 324 C

The durability of Pantone PMS 324 C spray paint for branded displays varies by how well the surface is prepared, the type of paint selected, whether a topcoat is applied, and the environment the item is used in. For the best result, make sure the substrate is properly cleaned and primed, select a paint type that matches your exposure needs (for example, choose exterior formulations for outdoor use), and consider adding a clear topcoat for extra protection. Always evaluate the finish and durability in the intended display environment before committing to production.

Before painting metal or powder-coated parts with Pantone PMS 324 C, thoroughly clean and scuff the surface to promote adhesion. The gloss or texture of existing coatings can affect how the PMS 324 C color appears when applied, and variations in substrate or prep may influence the final look. It is best to create and evaluate a sample part under actual lighting and with your planned finish to confirm the color meets your expectations before proceeding with a full project.

Pantone PMS 324 C is often specified in prototyping and concept modeling to ensure brand colors are visually consistent before production. Choose a paint format that matches your prototype needs, such as spray paint or brush-in-cap bottles for different materials. Always compare your painted sample to a physical Pantone reference in the lighting and finish you expect to use. This helps confirm that PMS 324 C meets visual brand standards during the development process.

Pantone PMS 324 C is defined as a brand color standard, not a touch-up or repair specification. If your project requires a touch-up-grade match for an existing painted part, especially to address wear or damage, Pantone PMS 324 C may not provide an exact match because coatings, materials, and finishes can vary widely. For best results, send a physical sample of your part for a custom match rather than relying on the Pantone color code alone.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 324 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 324 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.