Pantone™ PMS 3165 C

It is essential to confirm that PMS 3165 C is the exact reference required for your brand or display application. Pantone codes often include suffixes or are part of specific series, and minor differences can matter in professional contexts. Check your brand standards or project documentation to verify the correct Pantone code, including any suffix such as C (coated), U (uncoated), or other variations, before placing your order. This helps ensure you get the intended color match for maximum brand consistency.

Proper surface preparation helps achieve the best results with PMS 3165 C. Begin by cleaning the surface to remove dust, oil, and grease, using a suitable cleaner. Lightly scuff glossy or smooth surfaces with a fine abrasive to promote adhesion, then wipe away residue. For best results, test the paint on a small, inconspicuous area first to confirm adhesion and appearance. Effective preparation supports uniform coverage and the intended rich appearance of PMS 3165 C.

The finish selected for PMS 3165 C can significantly influence how the color appears. Glossy finishes tend to make the color look deeper and more saturated, while matte finishes can make PMS 3165 C appear slightly lighter and less intense. Comparing a matte and a gloss version side by side may reveal noticeable differences, even with the same color code. For visual consistency, match the original finish specified in your brand documentation whenever possible.

For best uniformity with PMS 3165 C on large surfaces, use consistent application techniques such as spraying in even, overlapping passes or rolling in the same direction. Plan your work so each section is completed without long breaks to avoid visible lines or patchiness. Because PMS 3165 C is dark and saturated, additional coats may be required for full coverage and even color. Always check coverage under project lighting conditions to verify a uniform, brand-consistent appearance.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 3165 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 3165 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.